Ma Certification Mining Electric Scraper Winch

Introduction Of MA Certification Mining CZPT Scraper Winch

Rake Mine Winch, mining electric scraper, scraper winch
MA Certification Mining CZPT Scraper Winch is mostly used to metal, chemical, contribution and the mine and so on, and the underground doing work, these kinds of as the transportation and so forth. Meanwhile, the scrape winch is just suitable to the parallel transportation on ground, or the slopes within five hundred Not be the hoisting equipment.
B. The principal parts of the winch: Deceleration gadget, primary roll, Vice reel, manage products, wire guiding system and motor. These components ended up set up inside of and outside the house the shell, the shell is a very good metal parts, the two to shield the supporting position, but also to bear all the load. It is related on the basis of two slide bolt.
Binoculars winch a learn reel (mounted on the right, ie, near to the motor aspect), a secondary reel (mounted on the still left).
A master reel (mounted in the middle) in the a few-drum winch, two vice reel (mounted on the remaining and right), 3 drum winch can be mounted two primary reel (mounted on the correct and middle), a vice quantity cylinder (mounted on the still left), each roll corresponding handle unit and a wire rope manual.

Parameter Of MA Certification Mining CZPT Scraper Winch
 

Title Parameter Device
Working pressure .69-one. MPa
Traction eight kN
Max rope speed 32 m/min
Air motor Rated power 7.five kW
Rotating speed 1200 rpm
    Drum Diameter 205 mm
Length a hundred and fifty mm
Wheel flange diameter 350 mm
            Wire-rope diameter nine.three mm
                Rope capacity forty five m
External dimension L × W × H 920× 675× 475 mm
Working        condition     Temperature -10 ­ +60 ° C
Humidity 100%  
Wind speed & wave height 6 / 2 degree/M
                        Weight 360 kg

  Photos Of MA Certification Mining CZPT Scraper Winch

 

Ma Certification Mining Electric Scraper Winch