Product Description

Merchandise Description


A. Higher electricity range from 75W to 15KW
B. Dia: 57mm-180mm
C. Simple for speed & route adjustment
D. Rich stock and fast shipping time in ten doing work days
E. Robust security for driver/controller
F. Life span over ongoing 10000 hrs
G. IP65 defense rank is available for us
H. Above 90% enery efficiency motor is obtainable
I. 3D file is available if clients essential
K.Higher-performance and secure matching driver and controller

Δ Kindly remind: As various customers could want diverse motor parameter for fitting your equipment. If below motor cannot fit your need, make sure you kindly ship inquiry to us with data for rated electrical power or torque,rated pace, and rated voltage for our new size drawing generating for you. Click Listed here to make contact with me. Many thanks a lot!

Proportions (Device: mm )
Mounting screws are integrated with gear head.

Gearbox Specification:

Gearbox Kind



Deceleration phase














Reduction ratio

Degree 1: 3, 4, 5, 7, ten
Amount 2: sixteen, 20, twenty five, 28, 35, forty, 70
Stage 3: 64, 80, 100, a hundred twenty five, a hundred and forty, 175, 200, 250

110mm 1000W BLDC motor with PLF90/PLE90 Planetary Gearbox 

Other Motor Specification Form: 
Δ Motor interface, Voltage, Pace can be tailored.

For More Specifics Of Merchandise Technical specs,
Remember to Click listed here contact us for updated dimension drawing if you have other various parameter needed. Thanks

Far more Motor Flange Dimensions

Δ Much more Motor Flange Measurement to pick, if you want other dimensions. Welcome to make contact with us to custom made.

BLDC Motor with Gearbox Selection

Firm Profile

DMKE motor was founded in China, HangZhou town,Xihu (West Lake) Dis. district, in 2009. Right after 12 years’ creativeness and advancement, we grew to become 1 of the foremost substantial-tech organizations in China in dc motor sector.

We focus in substantial precision micro dc equipment motors, brushless motors, brushless controllers, dc servo motors, dc servo controllers etc. And we make brushless dc motor and controller with extensive electrical power selection from 5 watt to twenty kilowatt also dc servo motor electricity selection from fifty watt to ten kilowatt. They are extensively used in computerized guided car , robots, lifting equipment,cleansing machine, healthcare tools, packing equipment, and many other industrial computerized equipments.

With a plant spot of 4000 square meters, we have constructed our personal provide chain with higher quality control standard and handed ISO9001 certification of quality technique.

With much more than 10 engineers for brushless dc motor and controllers’ study and development, we personal strong independent layout and development capability. Custom-manufactured motors and controllers are broadly approved by us. At the very same time, we have engineers who can communicate fluent English. That makes we can supply intime after-revenue help and advice effortlessly for our buyers.

Our motors are exported throughout the world, and in excess of 80% motors are exported to Europe, the United States, Saudi Arabia, Australia, Korea etc. We are hunting forward to creating long-phrase company relationship jointly with you for mutual enterprise achievement.


Q1: What sort motors you can give?
A1: For now, we mostly supply everlasting magnet brushless dc motor, dc equipment motor, micro dc motor, planetary gear motor, dc servo motor, brush dc motors, with diameter selection from 16 to 220mm,and electricity assortment from 5W to 20KW.

Q2: Is there a MOQ for your motors?
A2: No. we can acknowledge 1 pcs for sample producing for your screening,and the price for sample making will have 10% to 30% difference than bulk cost primarily based on distinct fashion.

Q3: Could you ship me a cost listing?
A3: For all of our motors, they are personalized based mostly on different requirements like electrical power, voltage, equipment ratio, rated torque and shaft diameter and so forth. The price tag also differs according to diverse get qty. So it really is difficult for us to offer a price list.
If you can share your thorough specification and get qty, we are going to see what offer we can offer.

Q4: Are you motors reversible?
A4: Indeed, nearly all dc and ac motor are reversible. We have technical individuals who can instruct how to get the purpose by different wire connection.

Q5: Is it achievable for you to develop new motors if we give the tooling value?
A5: Indeed. Remember to kindly share the comprehensive requirements like efficiency, measurement, once-a-year amount, concentrate on price tag and many others. Then we’ll make our analysis to see if we can prepare or not.

Q6:How about your shipping and delivery time?
A6: For micro brush dc gear motor, the sample shipping time is 2-5 times, bulk delivery time is about fifteen-20 days, is dependent on the order qty.
For brushless dc motor, the sample deliver time is about ten-fifteen times bulk time is fifteen-twenty days.
Pleasecontact us for last reference.

Q7:What is your warranty phrases?
A6: A single year

Application: Universal, Industrial, Household Appliances, Power Tools, Pump
Operating Speed: Adjust Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 8
US$ 330/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.


There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.


The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.


A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.


Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Dmke 1000rpm 600rpm 188rpm 60rpm 24rpm 1kw 1000W Planetary Gear Box Brushless Electric DC Motor 48V 36V 24V     wholesaler China Dmke 1000rpm 600rpm 188rpm 60rpm 24rpm 1kw 1000W Planetary Gear Box Brushless Electric DC Motor 48V 36V 24V     wholesaler
editor by CX 2023-04-12